Wij maken gebruik van cookies. Indien je op akkoord klikt geef je hiervoor toestemming. Lees onze cookieverklaring voor meer informatie. Daar is ook de mogelijkheid om aan te geven welke cookies je accepteert.
In 2016 NRG concluded the first part on the Qualification of the ITER First Wall Assemblies, the second part is conducted at the premises of project partner Forsungzentrum Juelich in 2018.
Alongside the exploitation of the High Flux Reactor in Petten, since 1960 a long term R&D programme on fusion material research was conducted. In this programme material qualification tests of Reduced Acivating Ferritic Material for ITER were performed and the European selection of candidate fusion fuel material for ITER was made. In addition many other fusion materials for various applications in fusion reactors were irradiated under ITER and fusion reactor representative irradiation conditions and subjected to extensive post irradiation research campaigns.
In 2005 decision was made to build ITER in the South of France and the first agreement was made to develop a joint undertaking for European Fusion Energy research and development for ITER which led to the resurrection of Fusion for Energy. This led to major reorganisations of fusion research funding structures of EURATOM and the decision to organize the EU long term fusion research in the European Joint Programme EUROFUSION from 2014 onwards. The Dutch subsidy from the ministry of economic affairs for long term fusion research stopped in 2016.
With the primary focus towards the building of ITER, the extensive network of fusion partnerships and the expertise and quality of NRG irradiations and measurements, resulted in 2012 in a contract research assignment from ITER for the nuclear qualification of first wall panels.
ITER is an international collaboration project with seven partners EU, China, Korea, Japan, US, Russia and India. The objective of ITER is to generate a net overall energy production rate from a fusion plasma. It will be the largest tokamak ever build until to date. Unlike the process in a nuclear reactor where energy is generated from the nuclear fission of Uranium atoms, energy in a hot plasma is generated from the fusion of two hydrogen atoms, emitting a helium atom and a neutron. This process requires extreme high temperature of the plasma (above 1 million deg. C). Fortunately the plasma can be controlled with magnetic field coils surrounding the ITER vessel. The neutron emitted from the hot plasma will be shielded by the ITER First wall, this consists of a layer of Beryllium joined to a Copper alloy which functions as a heat sink material. ITER will not generate electricity to the grid, but will be the first tokamak in the world to prove that that it fusion power for electricity production is feasible.
Together with the ITER First Wall team, the Chinese and Russian material suppliers and project partner Forsungszentrum Juelich, the first nuclear material qualification test was conducted. The first wall components were irradiated to ITER representative neutron fluence and temperature. The objective was to investigate the joint of the beryllium clad and the copper alloy heat sink material and to evaluate changes in thermal profiles of the component during High heat flux testing in the JUDITH- 1 facility at FZJ. The following activities are undertaken in each phase of the program:
The main challenge of the HESTIA irradiation in the HFR is to mimic the similar neutron irradiation conditions as in ITER, within a short period. This will be used to simulate radiation damage during the life span of the component in ITER in order to predict how long these components will maintain the integrity and functionality.
After irradiation, the irradiated mock-ups are transported to Julich research centre, where they are exposed to extremely high heat flux and intense variable thermal radiation. This can determine whether the irradiated material offers sufficient resistance to extreme heat load in the ITER system.
In the experimental design of the HESTIA irradiation device, special care was undertaken to keep the temperature uniform and constant throughout the full irradiation.
This was done by engineering of heat conduction blocks, surrounding the ITER FW components and with precision manufacturing of these blocks, a constant and uniform temperature of 240 C was kept during irradiation .
The fusion R&D program in general and the ITER first wall qualification project has generated data predict the behaviour of the first wall components. In addition nuclear competences have been further developed for future irradiation qualification and research programmes for many other clients and organisations.